How To Paint Over Oil Based Paint With Latex Paint

Those are the three best ways to transition oil based paint to latex in order from easiest to hardest. For people wanting to use a water based latex paint instead of stinky oil based paint to repaint doors, molding, cabinets, window sills, or other interior surfaces, follow the steps below.

How To Paint Water Based Paint Over Oil Based Paint Water Painting Painting Water Based Paint

If you paint directly over an old shiny oil based paint layer with some cheap latex paint, then there is probably going to be problems.

How to paint over oil based paint with latex paint. If the original paint was really shiny, you’ll want to use a primer like kilz. Allow the primer to dry. After that you can use your choice of paint.

With the right preparation, using latex paint on an oil base will give you exceptional results with a very strong, lasting painted surface. When this happens, the more recent latex paint job does not last long, and in the worst cases, seems to come off in sheets! We will determine the best course of action for painting you oil.

The age and hardness of the paint will determine which will be the most effective for you. Secondly, sand and prime (this will ensure professional painting results); If you have decided to paint over oil with latex paint, you need to follow some important steps to ensure the best outcome.

The primer can be latex, but it has to be a product that is made to prepare the surface. Take a rag with some acetone or nail polish remover on it and rub it on the surface. Then clean and prime with a binding primer.

An easy method is to get a. Use a good binding primer, let it dry, and then 2 coats of good latex paint. This will save you a ton of time and is a pretty quick fix.

That would take way too much time and money. Well, replacing all of the trim was out for sure. Use 150 grit paper for this sanding and go for a matte look.

The main thing you need to be worried about is having any type of shine being visible. Oil based paints are brittle and will crack causing anything on the surface of the oil based paint to not adhere properly and usually chip off or also crack. Replace all of the trim.

If it’s not too shiny, you can use a latex primer, then put a couple of latex coats over it. As previously mentioned, latex is flexible in nature. Thirdly, you may want to look into some of the innovative quality paint products from your local paint.

Wipe down the surface to remove any dust and dirt. Rub it over a small area on the surface. If you are not sure whether the surface has an oil finish then you can easily test it.

Painting latex over oil based paint is really not that big of a deal anymore, but the surface has to be prepped. Dip a cotton ball into a small amount of denatured alcohol. Start with serious sanding as mentioned above latex is very stretchy and oil paint will not adhere to it if it is applied directly.

Remember to always do a test spot first! You will need to sand if there are any places that have runs, drips, or rough areas. How to put latex over oil based paint step 1:

Coat it with an oil or latex bonding primer. It’s really all about the surface prep.

Pin On Living Room